Product Description

solar tube
1. Outer board: Aluminum-alloy, thickness 2.0mm
2. Internal bladder: Cooper pipe (φ *5*1)
3. Temperature-warmth layer: polyurethane with rock wool
4. Bracket: Stainless steel, thickness 1.2mm
5. Vacuum tube: Transition heat-pipe tube(***0X*7mm or ***0X*8mm)
6. Hail resistance: *5mm

Description
1) solar collector is designed with pressure up to 0.6Mpa.
2) Easy to use, also convenient to install
3) Can be put in the courtyard, on the roof or balcony
4) Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly

5)Efficiency: The advantage of solar tubes is that insulate the inner tube from heat loss. This means that once heat is absorbed, it is transferred to the water in the manifold, and not lost to the outside environment.

 

6)Aesthetics: Solar collector is designed to be low profile, sitting closed to the surface of the roof. Tubes are black and so blend in nicely with most roof colors.

7) Heat pipe has its special principle and function, and no water in the pipe. If one of the pipe is broken, the heat collector still could be used normally. Therefore, this kind of products has gradually accepted by consumers.